BCMXW - CLEAR CONCRETE SEAL # 47

  • MSDS: BCMXW
  • Manufacturer: CELLO CORP
  • Product Name: CLEAR CONCRETE SEAL # 47
  • National Stock Number: 8030-00N006508
Product Identification

Product ID:CLEAR CONCRETE SEAL # 47
MSDS Date:01/01/1985
FSC:8030
NIIN:00N006508
MSDS Number: BCMXW

Responsible Party
CELLO CORPORATION

Emergency Phone: 301-939-1234

Cage: DO840

Contractor
CELLO CORPORATION
HAVRE DE GRACE, MD 21078 US

Telephone: 301-879-2770

Cage: DO840

Ingredients

NAPHTHA (PETROLEUM SPIRITS OR BENZIN)

CAS: 8030-30-6

RTECS: SE7555000

Fraction By Weight: 35%

OSHA PEL 100 PPM

Hazards

Effects of Overexposure:SKIN DRYING: EYE IRRIT. EXCESSIVE INHAL MAY
CAUSE ANESTHESIA, HEADACHE, NAUSEA, UPPER RESP IRRIT.

First Aid

First Aid:EYES: FLUSH W/PLENTY OF H*2O FOR @ LEAST 15 MIN. CALL
PHYSICIAN. SKIN:WASH W/MILD SOAP & H*2O, APPLY SKIN CREAM. IF
SEVERE CALL PHYSICIAN. INHAL:RMV TO FRESH AIR, APPLY ARTIFICIAL
RESP IF NECESS, CALL PHYSICIAN. INGEST:CALL PHYSICIAN.

Fire Fighting

Flash Point:109F, SCC
Lower Limits:0.7
Upper Limits:6
Extinguishing Media:FOAM, CO*2, DRY CHEMICAL
Fire Fighting Procedures:WEAR SCBA

Accidental Release

Spill Release Procedures:FLUSH W/H*2O INTO A RETAINING AREA OF
CONTAINER. AVOID SPARKS, FIRE/HOT METAL SURFACES. SMALL AMTS MAY BE
ABSORBED ONTO APPROPIATE ABSORBENT.

Handling

Handling and Storage Precautions:KEEP COOL & AWAY FROM SOURCE OF
IGNITION. USE W/ADEQUATE VENTILATION.
Other Precautions:AVOID PROLONGED OR REPEATED PERSONAL CONTACT.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPRVD CARTRIDGE RESPIRATOR OR GAS
MASK.
Ventilation:MECHANICAL VENTILATION
Protective Gloves:IMPERMEABLE
Eye Protection:GOGGLES
Other Protective Equipment:RUBBER APRON
Supplemental Safety and Health
PRODUCT DOES NOT CONTAIN ISOCYANATE.

Chemical Properties

Boiling Pt:B.P. Text:325F
Vapor Pres:2
Vapor Density:4.9
Spec Gravity:0.8559
Evaporation Rate & Reference:4
Solubility in Water:NEGLIGIBLE
Appearance and Odor:DARK AMBER LIQUID W/SOLVENT ODOR
Percent Volatiles by Volume:65

Stability

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG ACIDS/SELECTED AMINES.
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAME, FIRE
Hazardous Decomposition Products:THERMAL DECOMPOSITION MAY YIELD CO*2
OR CO.

Disposal

Waste Disposal Methods:INCINERATE UNDER SAFE CONDITIONS/DISPOSE IAW
FEDERAL, STATE, & LOCAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.